This reference is for Processing 3.0+. If you have a previous version, use the reference included with your software in the Help menu. If you see any errors or have suggestions, please let us know. If you prefer a more technical reference, visit the Processing Core Javadoc and Libraries Javadoc.

Class

PImage

Name

filter()
Examples
example pic
PImage img1, img2;

void setup() {
  size(100, 100);
  img1 = loadImage("apples.jpg");
  img2 = loadImage("apples.jpg");
  img1.filter(THRESHOLD, 0.3);
  img2.filter(THRESHOLD, 0.7);
}

void draw() {
  image(img1, 0, 0);
  image(img2, width/2, 0);
}
example pic
PImage img1, img2;

void setup() {
  img1 = loadImage("apples.jpg");
  img2 = loadImage("apples.jpg");
  img2.filter(GRAY);
}

void draw() {
  image(img1, 0, 0);
  image(img2, width/2, 0);
}
example pic
PImage img1, img2;

void setup() {
  img1 = loadImage("apples.jpg");
  img2 = loadImage("apples.jpg");
  img2.filter(INVERT);
}

void draw() {
  image(img1, 0, 0);
  image(img2, width/2, 0);
}
example pic
PImage img1, img2;

void setup() {
  img1 = loadImage("apples.jpg");
  img2 = loadImage("apples.jpg");
  img2.filter(POSTERIZE, 4);
}

void draw() {
  image(img1, 0, 0);
  image(img2, width/2, 0);
}
example pic
PImage img1, img2;

void setup() {
  img1 = loadImage("apples.jpg");
  img2 = loadImage("apples.jpg");
  img2.filter(BLUR, 6);
}

void draw() {
  image(img1, 0, 0);
  image(img2, width/2, 0);
}
example pic
PImage img1, img2;

void setup() {
  img1 = loadImage("apples.jpg");
  img2 = loadImage("apples.jpg");
  img2.filter(ERODE);
}

void draw() {
  image(img1, 0, 0);
  image(img2, width/2, 0);
}
example pic
PImage img1, img2;

void setup() {
  img1 = loadImage("apples.jpg");
  img2 = loadImage("apples.jpg");
  img2.filter(DILATE);
}

void draw() {
  image(img1, 0, 0);
  image(img2, width/2, 0);
}
Description Filters the image as defined by one of the following modes:

THRESHOLD
Converts the image to black and white pixels depending if they are above or below the threshold defined by the level parameter. The parameter must be between 0.0 (black) and 1.0 (white). If no level is specified, 0.5 is used.

GRAY
Converts any colors in the image to grayscale equivalents. No parameter is used.

OPAQUE
Sets the alpha channel to entirely opaque. No parameter is used.

INVERT
Sets each pixel to its inverse value. No parameter is used.

POSTERIZE
Limits each channel of the image to the number of colors specified as the parameter. The parameter can be set to values between 2 and 255, but results are most noticeable in the lower ranges.

BLUR
Executes a Gaussian blur with the level parameter specifying the extent of the blurring. If no parameter is used, the blur is equivalent to Gaussian blur of radius 1. Larger values increase the blur.

ERODE
Reduces the light areas. No parameter is used.

DILATE
Increases the light areas. No parameter is used.
Syntax
pimg.filter(kind)
pimg.filter(kind, param)
Parameters
pimg PImage: any object of type PImage
kind int: Either THRESHOLD, GRAY, OPAQUE, INVERT, POSTERIZE, BLUR, ERODE, or DILATE
param float: unique for each, see above
Returnsvoid
Updated on January 1, 2021 03:38:09am EST

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.